Application cases

The salt spray corrosion test chamber is aimed at surface treatment of various materials, including quality inspection of hardware electroplating, hardware, electronic parts, chemical coatings, baking varnish, automobiles, motorcycles, hardware sanitary ware, screws, springs, magnetic materials, organic and inorganic coatings, anodic treatment, antirust oil and other industries, to test the corrosion resistance of their products< br />
JZY-60: Internal dimension: W× D× H 600× 450× 400mm

  & nbsp; & nbsp; & nbsp; & nbsp; & nbsp;& nbsp; Outer box size: W× D× H1070× 600× 1180mm
Technical parameters:
1. Temperature range: RT+10 ℃~55 ℃
2. Humidity range:≥ 93%R.H
3. Temperature uniformity:± 2℃
4. Temperature fluctuation:± 0.5℃
5. Fog sedimentation: 1 ～ 2ml/80c ㎡
6. spray mode: continuous/periodic optional
7. Test method:
Neutral salt spray test (NSS test), acetate salt spray test (ASS test), salt spray test (SS test)
Copper accelerated acetate spray test (CASS test) and other salt spray test methods;
8. Sample rack: the sample rack can meet the inclination test at 15 ℃~30 ℃ (two layers);
9. Air compressor model: V-0.013/12.5 (provided by the customer) Discharge pressure: 1.25M Volume flow: 0.13m3/min
  10 Control system: The control system independently developed by our company can operate for eight hundred thousand hours without failure in harsh working environment. Integrate with the current institute

  & nbsp; & nbsp;& nbsp; There are test methods (including continuous, interval)< br />
II Box material:

1. The salt spray test chamber is made of imported PVC reinforced hard plastic board, with smooth and smooth surface, and is resistant to aging and corrosion; Discard the FRP material when necessary

 & nbsp; Occasionally, the surface becomes discolored and fibrotic The all plastic structure salt spray test chamber can meet the requirements of long-term strong acid and strong salt spray test without any damage< br />
2. The box cover is made of fully transparent imported impact resistant plate, which is convenient for observing the test condition of the test sample during the test The cover and the box are sealed with water to prevent

 & nbsp; Salt mist leakage< br />
3. Installation requirements

 & nbsp;& nbsp;& nbsp; Power 220V& nbsp;& nbsp; Single phase 3KW& nbsp; 50/60HZ

III Heating system:

1. The test temperature in the box is water jacket heating and humidification, and the heating element is advanced titanium alloy protective tube from abroad, with a nickel chromium alloy far-infrared heating core built in< br />
 & nbsp; Fast temperature rise and uniform temperature distribution; Compared with the jacket type heating of the glass fiber reinforced plastic box, the power consumption is saved by about one half< br />
IV Executive Standard:

 & nbsp;& nbsp; This product meets GB2423.17 Basic Procedures for Electrical and Electronic Products Test Ka, salt spray test method and GB10587, GJB150, DIN50021

 & nbsp; Continuous salt spray and international standards; The test box of our company has passed the inspection of National Environmental Test Equipment Inspection Center< br />


5) Standard accessories:
number
name
HY-60
one
∨ Type X shelf
4
two
○ Stick
6
three
Standard measuring cylinder
1
four
Temperature indicator
2