Application cases

90° The tape peeling force tester is suitable for testing and analyzing the mechanical properties of rubber, tire, rubber hose, tape, sole, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum plastic pipe, composite material, waterproof material, fiber, textile, wire and cable, paper, gold foil, tape, silk thread, spring, wood, medical packaging materials, tape, etc., such as stretching, compression, tearing, peeling (both 90 degrees and 180 degrees)< br />
This machine is a new type of material testing machine that combines electronic technology with mechanical transmission. It has high accuracy and sensitivity for the measurement and control of load, deformation and displacement. This series of models adopts a single space structure, with the test space in the lower space. It is mainly applicable to the test of metal and non-metallic materials with the test load less than 2kN. It has a stress, strain and displacement control mode, and can calculate the maximum force, tensile strength, bending strength, compression strength Elastic modulus, elongation at break, yield strength and other parameters& nbsp;< br />
Technical parameters:
Capacity selection
2，5,10,20,50,100,200kg
Accuracy class
Grade 0.5
Effective force measuring range
0.4％～100％
Force measuring accuracy
Value indicating± Within 0.5%
Resolution of testing machine
Maximum load 1/± 250000 yards, no internal and external grading, and the whole range resolution remains unchanged
Load cell
Basic configuration: tension and compression sensors (maximum load)
Effective test width
150mm
Stretch space effectively
400mm
Test speed range
0.001～500mm/min
Displacement measurement accuracy
Value indicating± Within 0.5%
Test bench safety device
Electronic limit protection
Test bench return function
Manual or automatic selection, automatic or manual return to the initial test position after the test
Overload protection
The machine is automatically protected when the maximum load exceeds 10%
Fixture configuration
One set of stretching clamp
Host size
420× 350× 1520mm
electric machinery
220V± 10% 0.2KW/0.4KW
Main engine weight
(about) 50 Kg
Executive standards: GB/T16491-1996 electronic universal testing machine, etc< br />