Application cases

The mobile phone micro drop tester is applicable to the special detection equipment for mobile phone desktop drop durability test< br />
Structural advantages:

PLC programmable control, the performance is more stable than that of pneumatic structure, and the noise is small< br />
Technical specifications of mobile phone micro drop tester

1、 Purpose of mobile phone micro drop tester:

This machine is suitable for repeated drop test of mobile phones, telephone receivers, walkie talkies, MP3, CD, electronic dictionaries and other small electronic consumer products

2、 Action principle of mobile phone micro drop tester

The motor drives the upper clamp (air finger) down to clamp the mobile phone, rises, releases the air finger, and the mobile phone falls freely. At this time, the double acting cylinder telescopes and pushes the mobile phone to the position where the clamp can clamp it. The motor drives the upper clamp (air finger) down to clamp the mobile phone, rises, opens the air finger, and the mobile phone falls freely, repeatedly until the set number of times< br />
3、 Feature: can be set to automatically stop

Drop surface material: aluminum, with a thickness of 12mm. The baffle at the falling position is reset< br />
Prompt function: it can set the fixed number of keys and automatically stop the test< br />
This machine adopts Japanese Shinano motor as the driving source for lifting and dropping mobile phones, which is durable in use; It can realize the repeated drop of mobile phones and other products to detect the impact resistance of products falling from a certain height< br />


Because of the pneumatic components and autocratic control mode, the testing speed and consistency are greatly improved; The display and control LCD touch control screen+PLC programmable controller are used for action program control; Count at the same time, and automatically stop the test when the set number of times is reached

4、 Technical parameters of mobile phone micro drop tester:

1. Falling mobile phones at the same time: 2

2. Allowable test piece weight: 2kg (max)

3. Drop height: 60-150 mm

4. Test speed range: 6~20 times/min

5. PLC controller and touch screen: 1 set

6. Machine size: W550 * H750 * D650mm

7. Machine weight: about 40kg

8. Air source:≥ 0.5Mpa

9. Power: AC; 220V or specified

Note: The electrical part of the production is integrated with the main body

5、 Main configuration of mobile phone micro drop tester

1. Touch screen: 1, PLC: 1

2. Lifting and lowering motor: 1 set (SMC)

3. Vacuum sucker: 1 (SMC)

4. Vacuum generator: 1 (SMC)