Application cases

JZY-110 high and low temperature servo tensile testing machine is controlled by computer and widely used in rubber, plastic, wire and cable, textile, waterproof materials; The mechanical property test of non-woven fabrics and other non-metallic materials as well as metal wires, metal foils, metal plates and metal bars, together with special fixtures, is also applicable to the stretching, compression; Peel, shear, tear, bending (folding) test. It can print multiple data, and can make graphic output comparison according to different data, with high control precision and simple operation; Modular design is adopted, and various accessories are complete and flexible< br />
This machine is mainly used for testing the mechanical properties of metals such as tension, compression, bending, etc. It can also realize multiple dead cycle tests such as constant stress, constant strain, creep, relaxation, axial, radial, etc. Parameters such as tensile strength, yield strength, elongation, constant elongation stress, constant stress elongation and elastic modulus can be automatically calculated according to GB, JIS, ASTM, DIN and other standards< br />
Introduction to Control Software
  Software operating system language: Simplified Chinese. ll

  Force value unit: N, KN, Kgf, Lbf, length unit: mm, cm, in, freely convertible

  Control Method:

  Computer software sets speed, load break (break), running time and other control modes l

  Special manual operation box: it is convenient to calibrate and position the specimen
  Automatically judge material fracture, crushing, etc. and automatically stop the machine. Automatic return can be set to l

  Curve type:

  Load displacement, load time, displacement time. l

  Stress strain, strain time, stress time< br />
  The vertical and horizontal coordinates of the curve can be set arbitrarily. l

  Available test data:

  Maximum strength, minimum strength, breaking value, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum, minimum and average values of stripping interval, etc. (Customers need to select before ordering) l & nbsp;& nbsp;& nbsp;& nbsp;& nbsp; With overload, overcurrent, overvoltage, undervoltage, overspeed, stroke and other multiple protection. l

  The data results are exported from the crystal report format currently adopted by the national standard< br />
Specification Parameters: 
Capacity selection
kg
twenty thousand
Test accuracy
Level 0.5, the accuracy of test force indication is better than± 0.5%，
Load Sensing
High precision tension and pressure sensors (multiple sensors can be installed at the same time - optional)
high resolution
1/500000
Magnification
24 bit AD stepless amplification
Unit selection
N, kN
Test speed range
0.001~500 mm/min stepless speed regulation
Speed control accuracy
± 0.5%
Displacement resolution
0.001mm
Test effective width
Standard type: 300 mm
Test stroke (including fixture)
Standard type: 600 mm, effective stroke: 200 mm
Inner box size
300*380*600mm
Overload setting protection function
When exceeding 10% of the set test force, the system automatically stops for protection
Travel setting protection function
Setting protection of upper and lower limit of travel,
power
Servo motor
Japan Tamagawa Servo Motor& Servo drive controller
Power consumption
0.4kVA
Power Supply
1ø, 220 VAC, 50/60 Hz
Measuring system
Hardware Specification
The computer hardware specification provided shall be the original Haier brand machine, or provided by the customer
Special software
Refer to the software version of the computer measurement system
volume
host
76x60x310  cm(WxDxH)
weight
host
300 kg
Console
100 kg
Standard accessories
One set of tension clamps, one set of tools, one manual and one warranty
 
fixture
Refer to fixture catalog for purchase, or provide sample specifications for design and manufacturing