Application cases

JZY-800 sand dust test chamber is mainly used to test the performance of products during storage, transportation and use in a dusty climate environment; The sand and dust test box is mainly used to test the physical and other related properties of electrical and electronic products, lamp cabinets, electrical components, automobiles, motorcycles and their parts under the climate conditions simulating dust. After the test, the performance of the products can be judged to meet the requirements through verification, so that they can be used for product design, improvement, verification and delivery inspection Comply with IEC60529, GB/T 2423.371989 Basic Environmental Testing Procedures for Electrical and Electronic Products Test L: Sand Dust Test Method and GB4208-84 Classification of Degrees of Protection Provided by Enclosures. GB10485 Dust Control Test Method

Characteristics of JZY-800 sand dust test chamber:

The inner shell is made of stainless steel, the outer shell is sprayed with high-grade cold-rolled plate, and the imported digital display instrument controls the temperature in the test box< br />
Technical parameters of JZY-800 sand dust test chamber:

1. Internal dimension of test chamber: (800 x 800) mm (WxHxD). (excluding funnel)

2. External dimension of test chamber: (1200 x 1400 x 1000) mm (WxHxD)

3. Large bearing capacity of test chamber: 50Kg

4. Test temperature and humidity range:; Temperature: normal temperature~60 ℃

5. Temperature fluctuation:&le& plusmn; 2℃

6. Timing precision:± 1 minute

7. Vibration time: 0-99 hours and 99 minutes; Adjustable

8. Automatic vibration interval:; 0-99 hours and 99 minutes; Adjustable

9. Vacuum pressure: 0-20.00Kpa

10. Vacuum flow: 0-200L/min

11. Liner material: SUS304 mirror stainless steel plate& nbsp; Shell material: cold rolled plate powder spraying

12. Observation window material: large tempered glass

13. Test dust:; Dry talc powder, Portland cement, fume and ventilation ash

14. Amount of dust in the box:; 0～4kg/m³< br />
15. Air flow speed: 2~3m/S

16. Automatic dust raising time: 0-99H99M adjustable

17. Automatic dust raising interval time: 0-99H99M adjustable

18. Nominal wire diameter of metal screen:; 50μ m

19. Nominal distance between lines:  75μ m

20. Circulating air flow: smooth, adjustable and continuous at the working point< br />
21. Continuous and periodic dust blowing can be set at any time< br />
22. Total power (kw): 3.5

23. Dead weight (kg): 200

Structure and material of JZY-800 sand dust test chamber:

1. The inner tank is made of SUS304 stainless steel plate, and the shell is electrostatic sprayed with cold rolled plate. The door of the test chamber is a toughened transparent glass door, and the lower part of the door is an electrically controlled area. Talc powder simulating sand dust is placed in the hopper at the lower part of the test chamber. The circulating fan and automatic jar are used to blow talcum powder into the upper part of the working chamber through a 75 μ m square hole mesh to promote the formation of high-density dust mist in the test space, and the test object is tested< br />
2. Visible glass door with dust scraper, convenient for observing the condition of the tested sample in the test chamber

3. High quality fixed PU movable wheels are used at the bottom of the test chamber

JZY-800 sand dust test chamber circuit control system:

1. The imported programmable controller is used to effectively ensure that the test runs according to the standard< br />
2.、“ Chint” Executive components< br />
3. The time of the dust blower automatically alternates< br />
4. The time of vibration and vibration stop is automatically alternated< br />
5. The programmable controller has four output points to execute four programs at different times simultaneously< br />
6. Each output point of the programmable controller is controlled by two time periods (i.e. start time and stop time)< br />
7. The programmable controller can control the time of dust blower, dust vibration and total test time separately or collectively< br />
8. The test time * is 99 hours and 59 minutes< br />
Main configuration of JZY-800 sand dust test chamber:

Control instrument: TAIAN time controller made in Taiwan controls dust blowing, lighting and vibration cycle< br />
Electrical components: the main components are the products of domestic joint ventures< br />
Power supply:

1、AV220V   50HZ,  Two phase three wire system

2. Air leakage protection switch

3. Full sheathed terminal blocks

4. Timing and leakage protection of the whole equipment